Do you know that some flat owners need to apply for an HDB permit to install an air conditioner or other higher capacity equipment/appliances?
If your HDB flat is provided with a 30-amp main switch, you need to comply with certain guidelines and requirements before engaging any aircon installation works. Find out if you need to apply for a permit!
Types of Electrical Work
Permit Required?
Aircon installation using an existing approved 15-amp power point or 20-amp isolator provided by the HDB.
No
Installation of air-conditioner (casement/ window unit/ split type) using new 15-amp power point or new 20-amp isolator
Yes
You need to apply for an electrical permit for a 15-amp power point or 20-amp isolator before you can have the air conditioner installation carried out in your HDB flat.
HDB Flat Type
Maximum Total Running Current Allowed
Air-Conditioner Condensing Unit - Maximum Allowed Weight
1/ 2-room
5.00 amps
80kg
3/ 4/ 5-room/ Executive Masionette/ Multi-Generation
8.50 amps
80kg
Executive Apartment (with 4 bedrooms)
8.50 amps
80kg
Executive Apartment (with 5 bedrooms in converted block)
11.00 amps
80kg
HDB blocks completed on/ after 1 January 1994 or have undergone the Main Upgrading Programme (MUP)/ Home Improvement Programme (HIP) are provided with higher electrical loading of a 40-amp main switch. This means that if your HDB flat falls under this category, you don’t need to secure a permit to install your aircon.
As a homeowner, you must ensure the proper installation, safety, and stability of your air conditioner whether it is casement, window unit, or split type.
If you are unsure whether you need to apply for an HDB permit, check if your flat is provided with higher electrical loading.
Get aircon installation from only $808 nett. Earn up to 10% cashback for every booking with ServiceBack.com. Get started by signing up now!